Trumpf System
Press Brake Tooling
Trumpf System Press Brake Tooling
Trumpf press brake tooling features a 20mm wide tang, with a groove in the front and back of the tang. There are simple clamp or pins on the top tooling. For dies, usually it has 13mm to fix into the slot of the dies holder or crowning table. Trumpf press brake tool system is used on press brakes Trumpf.
WHY CHOOSE ACCURTOOL FOR YOUR TRUMPF PRESS BRAKE TOOL?
Good quality toolings
AccurTool takes strict quality control on every tooling production process to ensure the high quality Trumpf tool.
Full body hardening
Trumpf system press brake tool are full body hardened with HRC47 and laser hardening on radius up to HRC60 is option.
Fast delivery
AccurTool has a large number of standard Trumpf press brake tool in stock for fast delivery. Special tool delivery is at request.
Professional team
With over 10 year experience, AccurTool can offer you best Trumpf press brake tool solution for your bending operation.
Full tool range
AccurTool offers standard Trumpf press brake punch and die. Also special forming tools is customized.
Advanced process machines
AccurTool uses advanced milling and grinding machine to ensure the Trumpf press brake tooling tolerance.
TRUMPF SYSTEM PRESS BRAKE TOOL.
TRUMPF PRESS BRAKE PUNCH TANG SIZE
TRUMPF PRESS BRAKE PUNCH SECTION LENGHT
TRUMPF SYSTEM PRESS BRAKE PUNCH SEGMENT LENGTHS:
100mm LEFT EAR / 25mm / 25mm / 30mm / 35mm / 40mm / 45mm / 50mm / 100mm / 100mm RIGHT EAR
Note: Special Trumpf press brake punch lengths are available at your request, just contact AccurTool press brake tool and tell us the your requirements to customize your special tool.
HOW TO SELECT THE RIGHT TRUMPF PRESS BRAKE PUNCH LENGTH?
TRUMPF PRESS BRAKE DIE SECTION LENGHT
TRUMPF SYSTEM PRESS BRAKE DIE SEGMENT LENGTHS:
25mm / 25mm / 30mm / 35mm / 40mm / 45mm / 50mm / 100mm / 200mm
Note: Special Trumpf press brake die lengths are available at your request, just contact AccurTool press brake tool and tell us the your requirements to customize your special tool.
HOW TO SELECT THE RIGHT TRUMPF PRESS BRAKE DIE LENGTH?
What You Should Know About Press Brake Toolings
- Punch-The upper press brake tooling which generally features a v shape to match the die.
- Standard Punch-Standard punches are characteristically strong and stocky, making them ideal for thicker materials, higher loads and lengthy bending lines
- Acute Punch-press brake top tool with an angle less than 90°,usually it is 24/26/30/35°.
- Narrow Punch-Also known as sword punches or straight punches these are characterized by long, straight.
- Sash Punch-A generally straight thin tool with a sharp relief offset at the bottom.
- Gooseneck Punch-A special punches with deep U profiles to allow for large return flanges when bending.
- Punch Holder-A clamping mechanism which holds the punch, known as quick clamp.
- Adapter-Intermediate tooling which converts from one clamping size to another clamping size. They can also be used to lengthen the punch holder.
- Punch ear- Tooling specifically designed to form boxes with flanges on 2, 3 and 4 sides
- Die-The bottom press brake tool which typically features one or more v shaped groove.
- Single V die- A die with one groove on the top
- Two, Three & Four ways Die-A die has a square shape and a special profile cut into each side to allow for multiple setups from a single die.
- Rolla V -A die which has two half cylinders which support the flanges when the work piece is bent.
- Die Holder-Attached permanently to the lower beam this clamping mechanism will hold the die or rail in position.
- Adjustable die-A die where the v opening can be changed by turning a screw mechanism.
- Channel Tool-Tooling for forming sheet metal channels.
- Curling Tool-Tooling for creating an circular roll at the end of the sheet.
- Hemming Tool-Tooling for producing hems in to stages.
- Offset Tool-Offset tooling is a combination punch and die which has a Z shape and performs two bends in one stroke.
- Louver Tool-A raised feature which allows air to pass through the work piece while simultaneously protecting the opening.
- Radius Tool-Tooling specifically designed for forming a larger radius in the work piece.
- Ribbing Tool-Tooling which ads a round or v shaped grooved to the sheet metal in a single stroke.
Need assistance with choosing the best TRUMPF press brake tool for your machine?
We will be happy to answer any questions you may have. Please contact AccurTool Technical Sales Engineers.
